Half Round Arch
Half Round Arches from Fast Arch of America
Half Round Arches bring a classical distinction to a project. They exude a style that can bring a reminiscence of old world charm, or a distinctly modern look. Either way, Fast Arch of America makes creating your look, quick and easy.
How to Measure and Order a Fast Arch
Measure the actual width of the opening from side to side (as you look through it) of the rough frame opening.
"Flat" and "Ellipse" are usually patterned in 2" increments to allow for adjustment during installation. This won't affect the appearance of the final product and makes installation much simpler. In other words, 36-3/4" opening would take a 36" Flat or Ellipse Arch.
Half-Round Arches require a closer tolerance and should be measured to within 1".
This is the measurement between the top or peak of the arch and the lowest portion of the arch. Other terms you may have heard are the rise, leg, spring, or slope of the arch.
A good rule of thumb for an unspecified drop is to use a 6:1 ratio to the Width. In this case, a 48" wide arch would have a drop of 8".
The drop of a half-round or half-circle arch should be 1/2 of diameter of the circle, In other words, the drop of a half-round arch with a width of 72" would be 36"
The measurement of the thickness of the opening or niche (as you look through it). Usually it's the depth of the framing member. The measurement should be accurate to 1/4".
Will this be an Arch or a Niche. Arches are passage type openings and Niches have a closed back. The difference is in the direction of the back flange and the cost is the same.
Flat, Ellipse, Half-round? Take a look at the various types of Arches to see what styles are available. Or call us for something unique.
Installing an Eclipse Arch
The Arch Code is written on the throat of each arch and it will tell you the size of the arch. For example, an Arch Code of 42/8 is meant to fit a 42 inch wide opening and create an arch with an 8" drop.
Installing a Fast Arch is quick and easy:
- Get the Drop measurement from the Arch Code. It's the second number in the code. Measure down from the bottom of the upper framing member the distance of the Drop plus 1/2 inch. Draw a squared line across the inside face of the vertical framing member.
- Repeat on the opposite side framing member.
- Slip the half-arch over the framing members and align the 1/2" tail with the squared line. Make sure the arch is snugged firmly to the framing members at both the peak and tail.
- Insert a screw or drive a nail through the nailing flange near the bottom (indicated as Nail #1 in the illustration).
- Again making sure that the half-arch is snug to the horizontal framing member, place a screw or nail through the top nailing flange near the peak (indicated as Nail #2).
- Place a third nail or screw at the outermost corner (indicated as Nail #3).
- Move to the backside of the opening and repeat the procedure with 3 more fasteners.
- Slip the second half-arch over the framing members, aligning the tail with the squared line.
- Drive nails or screws at points 4, 5 & 6 (as indicated by the illustration above)
- Repeat on the back side.
- ALWAYS WORK FROM THE BOTTOM TO THE TOP
- There may be an overlap or gap of up to 1" between the two half-arches. The final appearance of the arch will not be affected.
- For even easier installation on wood framing, Fast Arch has designed a double-faced magnetic hammer. A 3/4" roofing nail can be driven through the arch nailing flange and into the wood with a single stroke. This tool allows even very large arches to be installed by a single person and speeds installation time. For more information on this tool and its availability, please call us.